I finally got started on the finishing aspect and its a slow and painful process. I sanded with 220 grit then 320 to prep the plastic. .Then I sprayed a plastic etch product which is supposed to pepare the surface for primer. I then used a filler primer,mixed with a catalyst,and sprayed a coat,sanded,resprayed,and sanded again. Finally I could apply some color and I used an enamel based product. Here are some pics with the first coat of color. It takes several days between coats,so while was waiting for it to dry, I attached the cooling fans and lid to get a glimpse of things to come.

Next Page: (6)

Page 1: Page 2: Page 3: Page 4: Page 5: Page 6: